Spring Floor Kit

Complete Kit to build your own spring floor.  You provide the lumber and the labor.

Each Spring Assembly Contains:

(1) 4" Coil Spring
(1) Top Mounting cap
(1) Bottom Mounting cap
(1) T-Nut
(1) Machine Screw
(1) I/E Lock Washer

FOR CUSTOM SIZING:

For example: If your floor is a 12x40, then this is the formula you would use:

There is 1 spring per square foot.

12x40=480 or = 480 springs.

Then you add the length of each side of the floor

12+12+40+40 =104 additional springs needed

This is because you have double springs around the edges.

Velcro Connectors is additional with the SF kit price all other kits has required Velcro included  

WARNING: Inherent in the nature of the sport of gymnastics is the possibility of injury or death. This gymnastics equipment is intended for use by only properly trained and qualified participants, under supervised conditions. When you use our products, know your limitations and the limitations of your equipment. Keep your equipment in good condition by inspecting for loose fittings or damage and test for stability before each use. Check the landing and safety mats for excessive wear and breakdown of the protective foam padding. Be sure that you are using the correct mats for the stunts performed.